Local:IndexProduct detail

Product center

CQB-F fluoroplast magnetic drive pumps

 

 product class:Magnetic pump series
 product name:CQB-F fluoroplast magnetic dri....

 

Performance

 data

 Range of capacity      1.8~1450m³/h 
Range of head  ≤133m
Medium temperature  -10℃~120℃
Ambient temperature   Up to 40℃
Maximum working pressure suction pressure+head of pump≤1.6MPa
Motor data

Supporting power

 

Voltage  380V
Frequency  50HZ
Rotating speed  2900r/min,1450r/min,970r/min
Protection class  IP44/IP54
Insulation class  B/F
Material pump body , pump cover,impeller  cast iron
Pump shaft  45 steel /stainless stell 3Crl3
Mechanical seal  silicon carbide,graphite,tungsten carbide,hard alloy and etc.

  • overview
  • feature
  • purpose
  • Model significance
  • Show case
  • data behavioral
  • Application area

   ALL flow-through parts of CQB-F fluorine lining magnetic pump are made of PVF2 and UHMWPE. Under normal temp., PVF2 has a fine corrosion resistance to many organic solvents like halogen, halogenated hydrocarbon, strong oxidant, boiling acid and alkali; UHMWPE has a fine corrosion resistance to inoxidable acid (dilute sulfuric acid, nitric acid and large concentration hydrochloric acid, phosphorus acid, hydrofluoric acid, and salty solutions. Both materials can’t resist the corrosion of strong oxidable acid. The fluorine alloy pump has a metal shell pipeline and outside. Those with transmission power below 3kw adopt full fluorine structure.


Material of Wet Parts: PVF2,F(xiàn)46
Connecting Type: Flange or Pipe
Medium Temperature(t): -20℃~100℃
Head H: 8~32(m);Power N: 0.12~18(kw)
Flow Q: 1.8~100 (m3/h);Kinematics Viscosity of medium: ≦30×10-6(m3/s

CQB50-32-160F
CQB-Magnetic Pumps
50-lnlet diameter(mm)
32-Outlet diameter(mm)
160-Impeller diameter(mm)
F-Wet parts as fluoric plastic allo

MOREproducts with related Magnetic pump series

返回上一頁